Maintenance method when brushless controller of electric vehicle has no output at all
Feb 12, 2023| 1. Refer to the main phase inspection and measurement diagram of the brushless motor controller, use the DC voltage+50V gear of the multimeter to detect whether the grid voltage of the six MOS tubes corresponds to the rotation angle of the handle.
2. If not, it means that the PWM circuit or MOS tube drive circuit in the controller is faulty.
3. Refer to the main phase check diagram of the brushless controller, measure whether the voltage of the input and output pins of the chip has a corresponding relationship with the rotation angle of the handle, and determine which chips have faults. Replace the chips of the same model to eliminate the fault.
Send Inquiry


